There are many benefits on being able to call on factory-service techs to maximize the life and uptime of your equipment.
Metal RollForming Systems (MRS), in Spokane, Washington, takes a different approach to maintenance and is proud to offer their customers not only the high quality machines, but also high-quality customer service—factory technicians that come to your job site.
“By having an MRS factory tech on site at your facility to properly tune and adjust your machine, you will be capitalizing on their years of experience in solving any current issues and preventing future issues,” says Bill Griffin, with MRS.
Here are just a few of the services that their technicians offer while on site:
ROLL FORMER:
1. Training on preventative maintenance (PM) roll-former maintenance;
2. Tooling maintenance & adjustment;
3. Grease bearings; and
4. Tension & lubricate drive chain.
INFEED TABLE:
1. Inspect & adjust entry guides as needed;
2. Grease bearings; and
3. Inspect & adjust belt tension.
SHEAR:
1. Training on proper PM maintenance;
2. Rotate shear blades, as needed;
3. Grease bearings;
4. Adjust brass gibs;
5. Tension & lubricate drive chain; and
6. Purge air tank & water trap.
UNCOILER:
1. Training on PM maintenance;
2. Remove & replace hydraulic oil & filter (customer supplied);
3. Grease bearings; and
4. Tension & lubricate drive chain.
TRIM ROLLFORMER:
1. Training on proper PM maintenance;
2. Tooling maintenance & adjustment;
3. Grease bearings; and
4. Tension & lubricate drive chain.
CUT-TO-LENGTH SLITTER:
1. Training on proper PM maintenance;
2. Rotate shear blades, as needed;
3. Grease bearings;
4. Adjust brass gibs;
5. Tension & lubricate drive chain; and
6. Purge air tank & water trap.
RIDGE PRESS:
1. Training on PM maintenance;
2. Purge air tank & water trap; and
3. Inspect dies and guides for wear.
COIL UPENDER:
1. Training on PM maintenance;
2. Visual inspection of wear;
3. Grease bearings; and
4. Tension & lubricate drive chain.
“We help keep machines in a high-performance state, because we realize it’s vitally important to any business,” Griffin said.
For more information regarding preventative maintenance on
your machines, please contact Metal Rollforming Systems at 888-284-6794. – Rollforming Magazine Winter 2018
Recent Comments